Note: This article is discontinued.
You can find the current article here: 6053599 / Cable tray MKS 35 FS
- Product description
-
Product descriptionMKS 35 = Medium duty cable tray system with a side height of 35 mm.
Magnetic shield insulation without cover 20 dB, with cover 50 dB.
- Technical data
-
Technical data
Base perforation 1 Connector version Supplied connectors CO₂ Footprint (GWP) Cradle-to-Gate 4,573 kg CO₂e / 1 Meter Dimension 35x150x3000 Dimension 35 x 150 Dimension B 150 mm Height 35 mm Length 3000 mm Length 10 ft Load test type according to IEC 61537 Type II Maintain electrical functions no Material Steel Mounting perforation in base yes NATO hole pattern no Plate thickness 1 mm Plate thickness 0,04 in Rustproof steel, pickled no Side perforation yes Supplied accessories RV 35 straight connector set Support spacing 1.0 m 1,2 kN/m Support spacing 1.5 m 0,75 kN/m Support spacing 2.0 m 0,55 kN/m Support spacing 2.5 m 0,3 kN/m Support spacing 3.0 m 0,2 kN/m Surface Strip galvanized Type of connector, cable support system Screwed Usable cross-section 5050 mm² Usable cross-section 50,5 cm² Wide-span version no Width 6 in Width 150 mm With cover no Technical data
Load diagram, cable tray, type MKS 35
- Permitted cable tray/ladder load in kN/m without man load
- Support width in m
- Rail bend in mm at permitted kN/m
- Load scheme during testing
- Load curve with cable tray/ladder width in mm
- Strut bend curve according to support width
- All types
-
All types
- Downloads
-
Data sheet MKS 315 FS / 6053572 , 0.32MB , pdfEU declaration of conformity MKS 315 FS / 6053572 , 0.10MB , pdfUK Declaration of Conformity MKS 315 FS / 6053572 , 0.14MB , pdfREACH Declaration of conformity MKS 315 FS / 6053572 , 0.12MB , pdfRoHS Declaration of conformity MKS 315 FS / 6053572 , 0.12MB , pdfMounting instructions Schraubbare Kabelrinnen mit Formteilen zum Schrauben und Klemmen , 5.42MB , pdfMounting instructions General information on the mounting , 2.61MB , pdf