Surge protection module ÜSM 10
Item no. 5092440 | EAN 4012196560844
- Product description
-
Product description
Surge protection module type 2+3 to DIN EN 61643-11 for 230/400 V power grids.
Appropriate for the protection of LED lighting.
• With function display and switch-off of the load circuit when a SPD fails
• Small size for the installation in the pole connection box or upstream of the LED driver
• 1+NPE protective circuit with a maximum discharge capacity of 10 kA
• Reduction of overvoltage to under 1,00 V or 1,000 V @ 5 kA
• With or without luminaire switch-off in case of defect
Application: In the cable transition box, junction boxes, cable ducts and trunking through to underfloor systems
To protect electronic devices such as LED luminaires against surge voltages
-
- Technical data
-
Connectivity options
Arrester surge current (8/20 µs) [total] 10 kA Combined voltage protection level [L-PE] 1500 kV Connecting cable length 0,09 m Dimension 230V Height 21 mm Installation type Miscellaneous Length 315 mm Lightning protection zone LPZ 1→2 Max. mains-side overcurrent protection 16 Maximum back-up fuse 16 A Maximum continuous voltage (L-N) 255 V Maximum continuous voltage (N-PE) 255 V Maximum continuous voltage AC 255 Maximum discharge current (8/20 μs) 10 kA Maximum discharge current (8/20 μs) [L-N] 10 kA Maximum discharge current (8/20 μs) [N-PE] 10 kA Nominal discharge current (8/20 µs) 5 kA Nominal discharge current (8/20 µs) [L-N] 5 kA Nominal discharge current (8/20 µs) [N-PE] 5 kA Nominal voltage AC (50/60 Hz) 230 V OBO_Nominal load current (input/output terminal) 16 A Operating temperature, max. 80 °C Operating temperature, min. -40 °C Pole version 1+N/PE Protection level [L-N] ≤1500 Protection rating IP20 Response time <25 ns Signalling on device Visual SPD to EN 61643-11 Type 2+3 SPD to IEC 61643-1 Class II+III Test class, type 2 yes Test class, type 3 yes Version for 1-pole + NPE for PC I Width 40 mm - All types
- Downloads
-
Catalogue Überspannungsschutz , 28.42MB , pdf
